Product Description
This Is A Pair Of The Tailgate Window Retaining Clips.
These Clips Attach To The Tailgate Lifter Bar & Hold The Rear Glass Securely In Place.
This Will Work For Electric & Manual Windows.
This 2-Piece Clip Set Is Correct & Will Fit All Jeep Grand Wagoneers & Full Size Wagoneers & Cherokees & Cherokee Chiefs.
These Tailgate Retainer Clips Very Commonly Crack Each & Every Time They Are Removed For Any Reason Or From Time As They May Become Loose & Finally Crack Apart While The Rear Tailgate Glass Is Going Up & Down. If Your Tailgate Glass Is Loose For Any Reason-You Will Need To Replace These Clips.
Also Check The Rear Tailgate Glass By Having The Rear Glass Half Way Up-Then With Your Hands-Slightly Pick Up The Glass-If It Rocks Or Moves In Any Direction Upward-You May Need These Clips & The Tailgate Lifter Bar As Well.
Any Time You Need To Get Inside The Tailgate Door For Any Reason, You Most Likely Will Have To Replace These One-Time Use Tailgate Lifter Bar Retainer Clips.
SAVE MONEY IF PURCHASING AN EXTRA SET FOR YOURSELF ON THESE RETAINER CLIPS!
REPLACES TAILGATE LIFTER BAR RETAINER CLIP PART# J0980363
TEAM GRAND WAGONEER TAILGATE RETAINER CLIP SET PART# J0980363
Product Videos
Custom Field
Product Reviews
11 Reviews Hide Reviews Show Reviews
-
tailgate retaining clips
clips worked fine, but tongs on them had to be pre bent slightly in order to get them to fit, otherwise we could not push them on.
-
No where as good as original
Too thin . Had to crimp lift track to get a better grip on glass . Original was a formed rubber Chanel . Would not be surprised if this slips off.
-
Fix back window
Worked great
-
regulator/window retaining clips
Getting these off and then replacing them is 1/2 the job of rebuilding the tailgate mechanisms. I recommend that you position the regulator arms at 9 o'clock and 3 o'clock (the 6 regulator bolts are available then and drill a hole down thru the inner tailgate panel above the clip so you can 1- see it and 2- apply leverage downwards to get the spring arms on the clip around the regulator stud. Trying to do it sideways thru the space between the inner and outer tailgate panels is a losing proposition. You should also build a block about 3" high and position it under the regulator arm/stud so the window channel and regulator arm are compressed and the clip tines can be pushed into the channel on the stud. Just cover the holes you drilled with duct tape- the carpeted panel on the inner tailgate will cover them.
-
Classic design that still works
Listed for tailgate but also fits manual door window. My application.
-
tcathrall@yahoo.com
tcathrall@yahoo.com
-
Tailgate windshield clips
These were exactly what I needed to clip the rear window slide studs in place. They are a pain to get in, keep at it you've got to hold your mouth right.
-
tailgate glass retainer clips
Just like OEM!
-
Good Clips
The clips have a good tight fit. They held the regulator in the window channel like original equipment would.
