Air Cleaner Check Valve Black / White GW 1974-1991

This Is A Direct Replacement OE Style Air Cleaner Check Valve. This Black/White Check Valve Plugs Into The Air Cleaner To Allow Vacuum To Get Inside The Air Intake Sensor When Needed. Each Air Cleaner Has 2-Of These Black/White Check Valves Going To...

Air Cleaner Pre-Heat Tube & Stove Kit GW 1979-1991

This Air Cleaner Pre Heat Tube Kit Is A Cure For A Rusted Out Exhaust Manifold Stove Which Save You The Worry Of Replacing A Whole Exhaust Manifold. This Direct Fit Pre Heat Hose Kit Attaches Right On To The Exhaust Manifold While The New Hose Directly...

Air Cleaner Thermal Vacuum Switch 4.2 Liter GW 1980-1988

This Is A OE Style Direct Replacement Thermal Ported Vacuum Switch That Is Located On The Side Of The Air Cleaner Assembly Which Hooks Up Into Your Emission Vacuum Harness On A 4.2 Liter Engine. This Air Cleaner Thermal Vacuum Switch Is Specifically...

Air Cleaner Vacuum Tee 1974-1991

This Is A Direct Style Vacuum Tee Made Specifically To Fit The Air Cleaner Vacuum Hose For Your Air Cleaner Assembly. This Direct Vacuum Tee Attaches To The Harness At  The Air Cleaner Which Connects The Yellow/White Reverse Delay Valve &...

Air Injection Hose Clamps V8-360/401 1976-1991

This Is A Stainless Steel Air Injection Hose Clamp That Is Specifically Designed With A Smooth Inside So That They Do Not Damage Any Rubber Or Silicone Hoses When They Are Tighted. This Stainless Steel Smooth Clamp Is The Correct Size For Jeep Grand...

Air Injection Manifold Pipe Check Valve GW 1974-1991

These Are Air Injection Manifold Emission One-Way Check Valves. This Will Fit All Jeep Grand Wagoneers, Full Size Wagoneers, Full Size Cherokees, Cherokee Chief, J10/J20 Pick Up Trucks With The V8-360 Engine From 1974-1991 & The 4.2 Liter Engine...

Air Injection Manifold To Divertor Complete Hose Set V8 GW

This Specialized Roll Of Blue High Temperature Silicone Hose Is Enough To Replace All Your Divertor Valve Hoses Going To The Smog Pump, Air Injection Manifolds & Check Valves On Your V8 360/401 Engines. Basically This Blue Hi-Temp Silicone Hose Will...

Air Injection Pipe Bolt V8-360/401 GW 1974-1991

This Is A Direct Replacement OE Style Air Injection Manifold Pipe Bolt That Is Hollow On The Inside That Allows Air That Is Pumped From The Air Or Smog Pump Which Then Passes Through The Divertor Valve & Then Goes Through The Air Injection Manifold...

Air Injection Pump Emission Vacuum Connector Tee V8-360 GW 1974-1991

This Is A Direct Replacement OE Style Better Design Than The Factory Original Emission Air Injection Manifold Pump Vacuum Hose Connector Tee. This Direct Fit High Density Plastic Vacuum Connector Tee Attaches The Air Injection Pump Hose That Comes From...

Air Pump Plastic Hose Clamp Pair GW 1974-1991

These are direct replacement style air pump & divertor valve plastic hose clamps. This direct fit plastic hose clamp set will only be sold in pairs. This pair of plastic emission hose hose clamps will fit all Jeep Grand Wagoneers, Full Size...

Air/Smog Pump Belt GW V8-360/401 1976-1991

This Is A Direct Replacement Better Than The OE Original Style Belts That Is Made To Fit Your V8 Engine Full Size Jeep Smog Pump Or Otherwise Called By Jeep Air Pump. This Belt Is Correct & Will Fit All Jeep Grand Wagoneers & Full Size Wagoneers...

Carburetor Base Gasket V8 GW 1974-1991

This Is A Direct Replacement OE Style Carburetor Gasket Made By Fel-Pro That Is Installed Underneath The Carb & Touches The Actual Carburetor Itself. This Carburetor Base To Intake Manifold Gasket Must Always Be Replaced When Changing & Even...

Carburetor Base Insulator Plate V8 GW 1974-1991

This Is A Premium Made Direct Replacement OE Style Plastic Insulator Plate That Goes Underneath The Base Of The Carburetor. This Direct Fit Carburetor Base Insulator Plate Is Correct For All Jeep Grand Wagoneers, Full Size Wagoneers, Full Size...

Carburetor Complete 3 Piece Gasket Set 2 BBL V8 GW 1974-1991

This Complete 3 Piece Carburetor Gasket Set Is Required On Your V8 Jeep Anytime You Are Installing Or Replacing The Carburetor On Your Full Size V8 Jeep. This Set Of Carb Gaskets Will Work On All Jeep Grand Wagoneers, Full Size Wagoneers, Full Size...

Carburetor To Manifold Gasket GW 1974-1991

This Is A Direct Replacement OE Style Carburetor Gasket Made By Fel-Pro That Is Installed Underneath The Carb & Touches The Intake Manifold. This Carburetor Base To Intake Manifold Gasket Must Always Be Replaced When Changing & Even Just...

Catalytic Converter Downstream Air Tube Kit W/Check Valve GW 1974-1991

This Is A Complete Catalytic Converter Downstream Air Tube Kit That Includes A Stainless Steel Flexible Downstream Tube & Check Valve With All The Needed Clamps & Adapters To Install This Kit On Your Grand Wagoneer Or Full Size Jeep. This Kit...

Charcoal Canister Filter GW 1974-1991

This Is A Direct Replacement OE Style Charcoal Canister Filter. The Direct Fit Charcoal Canister Filter Is Correct For All Jeep Grand Wagoneers, Full Size Wagoneers, Full Size Cherokees, Cherokee Chif, Jeep J10 Trucks & Jeep J20 Trucks From...

Crankcase Vent Valve W/Grommet 4.2 Liter GW 1981-1986

This Is A Direct Replacement OE Style Valve Cover/Crankcase Vent Valve Assembly.With This PCV Valve. Unlike Most Everywhere Else,We Have Included The Grommet To Ensure A Proper Seal & Prevent Any Vacuum Leaks That Can Cause Performance Problems...

Driver Air Injection Manifold Pipe V8 GW 1974-1991

These Air Direct Replacement OE Style Injection Manifold Pipes Made Specifically For Team Grand Wagoneer To Fit Your V8-360 & 401 AMC Engines. This Air Injection Pipe Set Comes With the Driver-Side We Also Include The Washer Seals To Prevent Any...

EGR Valve Gasket 1974-1989

This Is A Fel-Pro Brand EGR Gasket. Made In The U.S.A. Fel-Pro Uses Advanced Technology When Making This Specific Gasket To Ensure Superior Seal & Proper Fit. The Gasket Material Is Made For Performance And Durability So It Can Last A Long Time And...