Product Description
This Is A Direct Replacement Style Front Vent Glass Inner Division Bar Seal Pair.
The Division Bar Seal Is Mounted In The Triangular Shaped Window On The Front of The Front Door.
This Seals Sits Inside Of The Division Bar And Seals The Vertical Portion Of The Glass.
This Direct Fit Pair Of Division Bar Seals Will Fit All Jeep Grand Wagoneers & All Full Size Wagoneers & Cherokees Including Cherokee Chiefs & All Jeep J-10 & J-20 & J-3000 Pick-Up Trucks Including The Gladiator From 1963-1988.
These Division Bar Seals Are Included In Our Master Weatherstrip Kits! Check them out click here!
These Will Only Be Sold As A Pair.
TEAM GRAND WAGONEER FRONT INNER DIVISION BAR SEAL PAIR SET# DBSFRT
Product Videos
Custom Field
Product Reviews
3 Reviews Hide Reviews Show Reviews
-
Vent Glass Inner Division Bar Seal Set GW
Excellent quality product, good fit, easy to install. Just use proper rivets.
-
Difficulty level 8/10
This has nothing to do with the product itself, simply the item. The only thing I do with the TGW part was to file the back side of the holes flat & clean up the drilled hole locations a bit. The rest of this just to get them in: These are not easy to install. Correct rivets are hard to find, I had to take the shank from longer rivets & install them in the short rivets because my riveter wouldn't go inside the channels. I used a piece is 5/16 brake tubing about 3/8" long to put between the riveter & the head of the rivet. You need to silicone between the upper portion of this channel & the frame to keep rainwater from creeping inside (you'll see the factory sealer). Also seal the rivets center hole by the vent glass to keep out water. The rivet heads would also scrape the glass-I used aluminum rivets so I either used a cutoff wheel to shorten the head, or a pair of punches to smash them really flat, depending on their location.
-
Vent Glass Inner Division Bar Seal Set
Seals are exact as original except the rivet holes are 5/32" instead of 1/8" like the originals. !/8" pop rivets did not grip the seal so I had to turn them around and install from the back side then remove the nail head and peen the tail end flat to clear the division bar channel. Also shipping seemed too high for this item but I really needed them.
