Product Description
This Is A Direct Replacement OE Style Quadra-Trac Chain Kit Made By Crown Auto Sales Specifically For The Full Size Jeep.
This Quadra-Trac Chain Kit Will Fit Most All Full Size Jeep Wagoneers & Cherokees Including The Cherokee Chief & The Jeep J10 & J20 Pick-Up Trucks From 1976-1979 That Had The Quadra Trac Transfer Case.
This Kit Includes The 96-Link Transfer Case Chain & The Seal & Gasket Kit.
If Your Transfer Case Is Making Noises Or Vibrating When Making Turns & Or Is Making A Terrible Slapping Sound Against The Case Even At Idle--You Transfer Case Chain May Be Too Lose & Require Replacement Especially If Your Full Size Jeep Has Over 120,000 Miles On It & Or Transfer Case Fluid Was Not Regularly Replaced.
We Highly Recommend The Very Specific TCL-1 Transfer Case Fluid Available On Our Web Site With The Chain Kit.
REPLACES OE TRANSFER CASE CHAIN # J8122392
TEAM GRAND WAGONEER QUADRA-TRAC TRANSFER CASE CHAIN KIT# 8122392K
Product Videos
Custom Field
Product Reviews
1 Review Hide Reviews Show Reviews
-
So Far, So Good
The chain is very tight, but I finally got it on. I used it with a mile marker part time conversion kit. It is quiet and smooth. I am breaking it in gently, as I think this should avoid a lot of problems. Here is the process I learned for installing the chain: 1) the chain must be placed onto both sprockets and the entire assembly--chain and sprockets--positioned together. 2) place the upper sprocket over the transmission shaft, but not in the bearing yet--it will hang there. 3) insert the lower sprocket over the front output shaft, and insert it just beyond where the coupler mates with the shaft. the coupler will NOT slide over the shaft after upper sprocket is in the bearing. 4) then work the upper sprocket into its needle bearing. 5) at this point both sprockets are in their bearings, but not seated. use a wooden block and a hammer to gently seat the sprockets, moving them evenly into the front half of the case.
