Product Description
This Is A Direct Replacement OE Style Complete 9 Piece Dash Frame Mounting Screw Set.
Each Screw Comes Complete With A Square Spacer Like The Original Ones Did To Attach The Instrument Panel Frame To The Body Of The Car Just Underneath The Windshield Opening.
Basically Your Dash Frame Uses 7 Of These Specialized Black Torx Head Screws That Have An Extra Very Corrosion Or Protection Coating Along With A Zinc Coated Square Spacer To Mount It.
Then There Are 2 Extra Torx Head Bolts With Square Washers Where We Use A 410 Stainless Steel Screw That Attaches The Left And The Right Side Of The Dash Panel Located Just Below The Circle Of Each Side Of Your Dash Panel.
Both The Stainless Steel Torx Screws And The Black Extra Corrosion Coated Torx Screws Were Made Here In The U.S.A.
Jeep Has Discontinued These Screws Back In The Nineties And No Longer Carries These.
If You Are Removing The Dash Frame Or Instrument Panel Of Your 1986-1991 Grand Wagoneer Or 1986-1988 Jeep J10 Or J20 Pick Up Truck, This Would Be The Time To Replace Them.
Your Old Screws Can Become Very Rusty If The Windshield Seal Of Your Jeep Was Ever Leaking Before Especially On The Bottom Portion.
If Your Are Replacing The Windshield For A Leak Or Any Reason, These Screws Are Much Easier To Access And Look To See How Much If Any Rust Is On These Screws.
At This Time We Recommend Cleaning Any Rust At The Thread Holes To Prevent Any Further Rust And Then Replacing The Screws.
We Are Only Selling This As A Complete Set Of 9 Screws Which Will Save You Money However We Will List These Separately On Our Web Site As Each But Will Cost Much More Per Screw Than This Complete Set Under Part# J4005885.
TEAM GRAND WAGONEER 1986-1991 COMPLETE 9 PIECE DASH FRAME SCREW MOUNTING SET PART# J4005885-9
